Principal
A Rotary evaporator can form a thin film by rotating under constant heating and specific pressures (vacuum or atmospheric). It evaporates effectively and the vapours are condensed separately and collected.
Applications
- Concentration
- Solventextraction
- Crystallisation
- Petrochemistry
- Particularly handling temperature sensitivematerials
- Newly designed, highly functional evaporator for improved laboratory safety andsecurity featuring solid and stableoperation.
- Ergonomically designed to make the operation easier and safer
- New vertical double coil / Helix condenser of 0.27Sq.m
- Auto jack system provides driving unit up/down by key switchoperation
- Driving unit automatically lifted up in case of powerfailure.
- Over temperature protectionsafety
- Auto poweroff
- The rotation speed displays in digital ranging from 0-180/ 5-300rpm
- 500 ml to 5000 ml interchangeable evaporating flask.
- Inbuilt control panel with LCD display, set temp, bath temp, RPM
- Great vacuum sealed performance, high evaporative capacity
- Lightweight design, easy to use and move inlaboratories
- IP20 Protection
- Large bath capacity can accommodate upto 5L flask
- CE Certification
- Ergonomically designed to make the operation easier and safer
- 100mm motor jack slide and 130mm manual extension slide
- New vertical double coil condenser, 0.27m2, which is twice the area of ordinary condenser
- The rotation speed displays in digital, ranging from 5 ~300rpm
- Great vacuum sealed performance, high evaporative capacity
- Lightweight design made by aluminum profiles, easy to use and move in laboratories
- Teflon coated water/oil bath with safety handle to ensure the safety of the experiment, large about 4.5L can reach up to 1~2L sample flask
- Lift up to the highest point when the motor overloads
For advanced models of Rotary Evaporators, please download our latest brochure
Specifications
TECHNICAL DATA OF 5L ROTARY EVAPORATOR
| Model |
5L GMP & FLP |
5L NON-GMP & FLP |
5L NON-GMP & NON-FLP |
| Body |
SS 304 BODY |
MS Powder coated |
MS Powder coated |
| POWER SOURCE |
Electric Panel in Flameproof Enclosure |
Electric Panel in Non – Flameproof Enclosure |
| Voltage Supply |
220V , 3Ph 50Hz |
| Power Consumption |
3 kW |
| ROTATION OF FLASK |
| Rotation & Controlling |
Soft start & controlling with VFD |
| Rotation Drive |
AC Synchronies Motor 0.25HP (Reputed make) |
AC Synchronies Motor 0.25HP |
| Rotation Speed |
10 to 135 |
| Controlling |
By VFD |
| Distillation Rate |
up to 1 – 2 L/H for water |
| Accuracy |
2 RPM |
| BATH HEATING |
| Temp Range |
0-180°C |
| Bath Heater Power |
2 kW |
| Bath Heating Control |
Electronic with PT-100, control accuracy +/-2 ◦C |
| Bath Construction |
Stainless steel 304 with Cover for heat protection |
| Bath Lift |
Motorised & controlled Linear Movement by Limit switches |
| GLASS ASSEMBLY |
| Rotating Flask |
5L-1 no |
| Receiving Flask |
2L – 1 no (Option for twin receivers available) |
| Condensate Area |
Vertical, 0.3 Sq.m surface area |
| Maximum Vacuum |
133 Pa |
| Safety Measures |
MCB & Short Circuit Breaker , Heater Protection |
| Other Accessories |
pipe supports, condensor holder, receiver flask holder, and rotating flask holder on bath |
| DISPLAY |
| RPM |
Digital |
| Bath Temp |
Digital with PID Controller |
| Vapour Temp |
Digital |
| Time Totalizer |
Digital |
| SENSORS |
| Vapour Temperature |
PT – 100, 3 wire with FLP Head |
PT – 100, 3 wire |
| Bath Temperature |
PT – 100, 3 wire with FLP Head |
PT – 100, 3 wire |
| Castor Wheels |
All four wheels with Lock [Double Wheels] |
| Outer body covering (Optional) |
SS-304 Body |
MS Powder coated |
MS Powder coated |
| Frame guard covering with transparent glass to protect the user from steam, oil spillage and accidental glass breakage. It consists of PLC and HMI with all the parameters. |
| Automation (Optional) |
Can be hooked up with HMI & PLC for operation and storing the data. Pre defined recipe can also be integrated. |
TECHNICAL DATA OF 10L ROTARY EVAPORATOR
| Model |
10L GMP & FLP |
10L NON-GMP & FLP |
10L NON-GMP & NON-FLP |
| Body |
SS 304 BODY |
MS Powder coated |
MS Powder coated |
| POWER SOURCE |
Electric Panel in Flameproof Enclosure |
Electric Panel in Non – Flameproof Enclosure |
| Voltage Supply |
220V , 3Ph 50Hz |
| Power Consumption |
3 kW |
| ROTATION OF FLASK |
| Rotation & Controlling |
Soft start & controlling with VFD |
| Rotation Drive |
AC Synchronies Motor 0.25HP (Reputed make) |
AC Synchronies Motor 0.25HP |
| Rotation Speed |
10 to 135 |
| Controlling |
By VFD |
| Distillation Rate |
up to 3.5 – 4 L/H for water |
| Accuracy |
2 RPM |
| BATH HEATING |
| Temp Range |
0-180°C |
| Bath Heater Power |
4 kW |
| Bath Heating Control |
Electronic with PT-100, control accuracy +/-2 ◦C |
| Bath Construction |
Stainless steel 304 with Cover for heat protection |
| Bath Lift |
Motorised & controlled Linear Movement by Limit switches |
| GLASS ASSEMBLY |
| Rotating Flask |
10L-1 no |
| Receiving Flask |
5L – 1 no (Option for twin receivers available) |
| Condensate Area |
Vertical, 0.5 Sq.m surface area |
| Maximum Vacuum |
133 Pa |
| Safety Measures |
MCB & Short Circuit Breaker , Heater Protection |
| Other Accessories |
pipe supports, condensor holder, receiver flask holder, and rotating flask holder on bath |
| DISPLAY |
| RPM |
Digital |
| Bath Temp |
Digital with PID Controller |
| Vapour Temp |
Digital |
| Time Totalizer |
Digital |
| SENSORS |
| Vapour Temperature |
PT – 100, 3 wire with FLP Head |
PT – 100, 3 wire |
| Bath Temperature |
PT – 100, 3 wire with FLP Head |
PT – 100, 3 wire |
| Castor Wheels |
All four wheels with Lock [Double Wheels] |
| Outer body covering (Optional) |
SS-304 Body |
MS Powder coated |
MS Powder coated |
| Frame guard covering with transparent glass to protect the user from steam, oil spillage and accidental glass breakage. It consists of PLC and HMI with all the parameters. |
| Automation (Optional) |
Can be hooked up with HMI & PLC for operation and storing the data. Pre defined recipe can also be integrated. |
TECHNICAL DATA OF 20L ROTARY EVAPORATOR
| Model |
20L GMP & FLP |
20L NON-GMP & FLP |
20L NON-GMP & NON-FLP |
| Body |
SS 304 BODY |
MS Powder coated |
MS Powder coated |
| POWER SOURCE |
Electric Panel in Flameproof Enclosure |
Electric Panel in Non – Flameproof Enclosure |
| Voltage Supply |
220V , 3Ph 50Hz |
| Power Consumption |
5 kW |
| ROTATION OF FLASK |
| Rotation & Controlling |
Soft start & controlling with VFD |
| Rotation Drive |
AC Synchronies Motor 0.25HP (Reputed make) |
AC Synchronies Motor 0.25HP |
| Rotation Speed |
10 to 135 |
| Controlling |
By VFD |
| Distillation Rate |
up to 3.5 – 4 L/H for water |
| Accuracy |
2 RPM |
| BATH HEATING |
| Temp Range |
0-180°C |
| Bath Heater Power |
4 kW |
| Bath Heating Control |
Electronic with PT-100, control accuracy +/-2 ◦C |
| Bath Construction |
Stainless steel 304 with Cover for heat protection |
| Bath Dimensions |
Outer Ø 425 mm x 330mm deep |
| Bath Lift |
Motorised & controlled Linear Movement by Limit switches |
| GLASS ASSEMBLY |
| Rotating Flask |
20L-1 no |
| Receiving Flask |
10L – 1 no (Option for twin receivers available) |
| Condensate Area |
Vertical, 1 Sq.m surface area |
| Maximum Vacuum |
133 Pa |
| Safety Measures |
MCB & Short Circuit Breaker , Heater Protection |
| Other Accessories |
pipe supports, condensor holder, receiver flask holder, and rotating flask holder on bath |
| DISPLAY |
| RPM |
Digital |
| Bath Temp |
Digital with PID Controller |
| Vapour Temp |
Digital |
| Time Totalizer |
Digital |
| SENSORS |
| Vapour Temperature |
PT – 100, 3 wire with FLP Head |
PT – 100, 3 wire |
| Bath Temperature |
PT – 100, 3 wire with FLP Head |
PT – 100, 3 wire |
| Castor Wheels |
All four wheels with Lock [Double Wheels] |
| Outer body covering (Optional) |
SS-304 Body |
MS Powder coated |
MS Powder coated |
| Frame guard covering with transparent glass to protect the user from steam, oil spillage and accidental glass breakage. It consists of PLC and HMI with all the parameters. |
| Automation (Optional) |
Can be hooked up with HMI & PLC for operation and storing the data. Pre defined recipe can also be integrated. |
TECHNICAL DATA OF 50L ROTARY EVAPORATOR
| Model |
50L GMP & FLP |
50L NON-GMP & FLP |
50L NON-GMP & NON-FLP |
| Body |
SS 304 BODY |
MS Powder coated |
MS Powder coated |
| POWER SOURCE |
Electric Panel in Flameproof Enclosure |
Electric Panel in Non – Flameproof Enclosure |
| Voltage Supply |
220V , 3Ph 50Hz |
| Power Consumption |
7 KW |
| ROTATION OF FLASK |
| Rotation & Controlling |
Soft start & controlling with VFD |
| Rotation Drive |
AAC Synchronies Motor 0.5HP (Reputed
make) |
AC Synchronies Motor 0.5HP |
| Rotation Speed |
10 to 135 |
| Controlling |
By VFD |
| Distillation Rate |
up to 4 – 5.8 L/H for water |
| Accuracy |
2 RPM |
| BATH HEATING |
| Temp Range |
0-180°C |
| Bath Heater Power |
6 kw with FLP Head |
6 kw without FLP head |
| Bath Heating Control |
Electronic with PT-100, control accuracy +/-2 ◦C |
| Bath Construction |
Stainless steel 304 with Cover for heat protection |
| Bath Dimensions |
Outer Ø 560 mm x 400mm deep |
| Bath Lift |
Motorised & controlled Linear Movement by Limit switches |
| GLASS ASSEMBLY |
| Rotating Flask |
50L-1 no |
| Receiving Flask |
20 L – 1 no (Option for twin receivers available) |
| Condensate Area |
Vertical, 1.5 Sq.m surface area |
| Maximum Vacuum |
133 Pa |
| Safety Measures |
MCB & Short Circuit Breaker , Heater Protection |
| Other Accessories |
pipe supports, condensor holder, receiver flask holder, and rotating flask holder on bath |
| DISPLAY |
| RPM |
Digital |
| Bath Temp |
Digital with PID Controller |
| Vapour Temp |
Digital |
| Time Totalizer |
Digital |
| SENSORS |
| Vapour Temperature |
PT – 100, 3 wire with FLP Head |
PT – 100, 3 wire |
| Bath Temperature |
PT – 100, 3 wire with FLP Head |
PT – 100, 3 wire |
| Castor Wheels |
All four wheels with Lock [Double Wheels] |
| Outer body covering (Optional) |
SS-304 Body |
MS Powder coated |
MS Powder coated |
| Frame guard covering with transparent glass to protect the user from steam, oil spillage and accidental glass breakage. It consists of PLC and HMI with all the parameters. |
| Automation (Optional) |
Can be hooked up with HMI & PLC for operation and storing the data. Pre defined recipe can also be integrated. |
TECHNICAL DATA OF 100L ROTARY EVAPORATOR
| Model |
100L GMP & FLP |
100L NON-GMP & FLP |
100L NON-GMP & NON-FLP |
| Body |
SS 304 BODY |
MS epoxy coated |
MS epoxy coated |
| POWER SOURCE |
Electric Panel in Flameproof Enclosure |
Electric Panel in Non – Flameproof Enclosure |
| Voltage Supply |
415V , 3Ph 50Hz |
| Power Consumption |
14 KW |
| ROTATION OF FLASK |
| Rotation & Controlling |
Soft start & controlling with VFD |
| Rotation Drive |
AAC Synchronies Motor 1HP (Reputed
make) |
AC Synchronies Motor 1HP |
| Rotation Speed |
0 to 90 |
| Controlling |
By VFD |
| Accuracy |
2 RPM |
| BATH HEATING |
| Temp Range |
0-180°C |
| Bath Heater Power |
6 kW X 2 |
| Bath Heating Control |
Electronic with PT-100, control accuracy +/-2 ◦C |
| Bath Construction |
Stainless steel 304 with Cover for heat protection |
| Bath Dimensions |
Outer Ø 750 mm x 550mm deep |
| Bath Lift |
Motorised & controlled Linear Movement by Limit switches |
| GLASS ASSEMBLY |
| Rotating Flask |
100L-1 no |
| Receiving Flask |
50 L – 1 no (Option for twin receivers available) |
| Condensate Area |
Vertical, 1.5 / 2.5 Sq.m surface area |
| Maximum Vacuum |
133 Pa |
| Safety Measures |
MCB & Short Circuit Breaker , Heater Protection |
| Other Accessories |
pipe supports, condensor holder, receiver flask holder, and rotating flask holder on bath |
| DISPLAY |
| RPM |
Digital |
| Bath Temp |
Digital with PID Controller |
| Vapour Temp |
Digital |
| Time Totalizer |
Digital |
| SENSORS |
| Vapour Temperature |
PT – 100, 3 wire with FLP Head |
PT – 100, 3 wire |
| Bath Temperature |
PT – 100, 3 wire with FLP Head |
PT – 100, 3 wire |
| Castor Wheels |
All four wheels with Lock [Double Wheels] |
| Outer body covering (Optional) |
SS-304 Body |
MS Powder coated |
MS Powder coated |
| Frame guard covering with transparent glass to protect the user from steam, oil spillage and accidental glass breakage. It consists of PLC and HMI with all the parameters. |
| Automation (Optional) |
Can be hooked up with HMI & PLC for operation and storing the data. Pre defined recipe can also be integrated. |
These are general specifications, it may deviate as per client’s requirement or at detailing stage.
